Residential Water Consumption

There seems to be a general consensus that water will be the most valuable natural resource in the future. In some parts of the world, people are quite aware of this fact and are doing everything they can to preserve this resource. In others, on the other hand, the awareness is still at a very low level and water is mistreated, wasted and polluted without any penalty for such behavior.

It may seem too obvious to talk about how we need to save water, not only because we would be paying less, but more importantly because we need to save this resource without which there’s no life. Fortunately, technology and science have made huge progress recently and we can use the benefit of that development to our advantage. Here are just some tips all of us can use to save more water at home.Residential Water Consumption

Double Flush for Double Savings

If you don’t have one of those double flush (a.k.a. “dual flush”) toilets, you’re wasting much more water than you should. These modern and efficient toilets allow you to choose whether you need a big or small flushing function. In terms of quantities, you might spend around 7 litres or perhaps only a half of that amount. It’s your call. Bearing in mind that, in most cases, you don’t need anything more than a small flush, you can see how much water will be saved and how much lower your water bill will be. You can even calculate how much time you’d need to completely pay off the investment in purchasing and installing such a fixture.

Use More Air

Simple-to-install devices called aerators can be attached to the faucet to manage the water flow. What they do is provide the same pressure and performance with reduction in the amount of water used. They are quite inexpensive and require no special skills for installation, which is the reason more and more people are using them wherever they can.

Save while Showering

As more and more people are choosing to have a shower instead of taking a long bath because it’s much quicker, they are also saving water. What most of them still don’t know, however, is that they can go a step further. Modern shower heads can save as much as several gallons of water in a single shower,claim at a trusted Monmouth County plumbing service.What you can do is multiply this amount with the number of people living in your house and you’ll see how amazing this potential saving is.

Cheap Solutions

One of the things you can use if you’re cash-strapped is to install tank bags, which can save up to 3 litres per flush, and you don’t need to replace your toilet. Of course, you may decide not to fill the bag up, but only as much as you need. Some people even put a brick or two in the tank, but that might be considered an extreme measure.

Other Means

Depending on your budget, you might also be interested in shower timers and regulators, which limit and control the amount of time, i.e. water, you use while taking a shower. Some people also uses valves for the same purpose, since they allow them to stop the water flow while they are applying soap and shampoo.

Naturally, before you start thinking about the possible ways of saving both your water and money, you need to inspect your installations carefully and check for any possible leakage. Even a slightest problem and dripping leads to unnecessary waste and expenditure. Also, if not fixed immediately, it can damage some parts of your home, so that you need to invest heavily in repair works.

If you find any work related to purchase and installation simply overwhelming, you should consult a professional, who’ll be able to give you the best advice about your concerns. Remember, this is a win-win situation, since you’re helping both the most important natural resource and your budget and you need to make sure you’re making right choices.